Made in Canada Model No. 05M0201 Accurately hones chisel & plane blades with precise bevel angles Will sharpen blades up to 2-3/8\” wide & 5/8\” thick Cam roller creates a micro-bevel without unclamping or resetting tool Sturdy & smooth rolling brass wheel on guide Works excellent with the Veritas Angle Jig See here Main frame is a die-casting, & the other parts on guide are made of brass & steel Product Description Specs This precision Veritas Honing Guide is a durable & accurate jig for shapening edge-cutting tools. It has a very wide roller, & is uniquely suited to adding a micro bevel after sharpening. Simply hone then turn the guide setting knob & give it a few more strokes. The main frame is made from a die-casting, & the other parts are all machined from brass & steel. For maximum versatility, it should be used with the angle setting jig which has the five most common bevel angles built into a pentagon wheel See here. For chisel & plane iron blades up to 2-3/8 wide & 5/8 thickness. *Note: Stone & Chisel in picture not included. Product Title Overall Jig Size Brass Roller Length Model # Veritas Honing Guide 3-1/2\” Long x 2-7/8\” High x 1-1/4\” Wide 1-1/4\” 05M0201 | 860-3010 For California Residents: WARNING: Cancer & Reproductive Harm – www.P65Warnings.ca.gov WARNING: Drilling, sawing, sanding or machining wood products can expose you to wood dust, a substance known to the State of California to cause cancer. Avoid inhaling wood dust or use a dust mask or other safeguards for personal protection. For more information go to www.P65Warnings.ca.gov/wood